Unit installation

RSU-503 Redundancy Switch Unit RSU-503L Option
Rev. 8 A–7
Table A-2. Waveguide Switch Cable Dimensions
Dimension “A” Dimension “B”
12 ft. 10 ft.
17 ft. 15 ft.
22 ft. 20 ft.
A.5 Addressing
The following are the factory default addresses:
• RSU-503 is set to address 1
• RFT A is set to address 2
• RFT B is set to address 3
The proper M&C cable hook-up is critical:
• RFT A must be connected to the RSU Port A
• RFT B must be connected to the RSU Port B
Note:
If these connections are reversed, no communications will take place
.