Specifications

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

3.3 RSU COMMUNICATIONS

If the KP-10 is connected to a single RFT, the KP-10 global address of “*” is sufficient

for communicating with the terminal. There is no need to ascertain the actual address of

the RFT, in this case.

3.3.1 KP-10 KEYPAD VARIATIONS FOR AN RSU

When the KP-10 is being used with an RSU, the valid function keys are as follows:

RFS RMS

Scroll

ROS

RESET

Figure 7. Function Keys for use with an RSU

Table 10. Descriptions of Function Keys used with an RSU

Function Key Description

[RESET] Reset External Keypad

[ROS] Redundancy Switch Operation Status

[RFS] Redundancy Switch Fault Status

[RMS] Redundancy Switch Maintenance Status

[ASR] Switch Address (See Note)

Note: The key labeled [KP ON] performs the

[ASR] function.

CAUTION

Make sure the [SHIFT] indicator LED is ON before using these keys.