Specifications

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

3.2.2 SINGLE SYSTEM ADDRESS

If the KP-10 is connected to a single RFT, the KP-10 global address of “*” is sufficient

for communicating with the terminal. There is no need to ascertain the actual address of

the RFT, in this case. A list of typical commands used with an RFT includes the

following:

<add/ 'UCF_'

<add/ 'DCF_'

<add/ 'RF_'

<add/ 'UCA_'

<add/ 'DCA_'

<add/ 'AS_'

<add/ 'BR_'

<add/ 'PS_'

<add/ 'RFJ_'

<add/ 'CLNA_'

<add/ 'FAN_'

<add/ 'LFE_'

<add/ 'SEL_'

<add/ 'PGM_'

<add/ 'CPGM_'

<add/ 'XFE_'

<add/ 'OS_'

<add/ 'FS_'

<add/ 'SF_'

<add/ 'MS_'

<add/ 'ET_'

<add/ 'LM_'

<add/ 'LPE_'

<add/ 'RSW_'

Note: Replace "add" with the address of the device being accessed.