Specifications

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

3.2 SINGLE RFT COMMUNICATIONS

3.2.1 KEYPAD VARIATIONS FOR AN RFT

When the KP-10 is being used with a single-system RFT, the valid function keys are:

FS MS

Scroll

RESET

Figure 6. Function Keys for use with an RFT

Table 9. Descriptions of Function Keys used with an RFT

Function Key Description

[RESET] Reset External Keypad

[OS] Switch Operation Status

[FS] Switch Fault Status

[MS] Switch Maintenance Status

[AS] Switch Address (see Note)

Note: The key labeled [KP ON] performs the

[AS] function.

CAUTION

Make sure the [SHIFT] indicator LED is OFF before using these keys.