Specifications

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

2.3.4 CURSOR MOVEMENT KEYS

Cursor keys, containing directional arrows, are located below and to the left of the

character keys. The cursor keys do not require use of the [SHIFT] key. Press the key to

move the display screen cursor in the direction indicated by the arrow on the key.

2.4 CONFIGURING THE KP-10

Access the default configuration settings using either of these two methods:

! While pressing any key, supply power to the external keypad.

! If power is already supplied, press [RESET] for a second.

The default configuration consists of several items:

! Version

! Contrast setting

! Baud rate

! Data format

! Serial mode

These items appear in a series of displays, each one accessed by pressing and releasing a

key.

After the default configuration has been completed, the KP-10 is ready for input.

2.4.1 VERSION

After power-on, the Version (v1.1) appears on the display screen.

2.4.2 CONTRAST CONTROL

Release the key pressed during power-on to display “CONTRAST” on the screen.

! DARKER — Press [SCROLL UP] to darken the display screen contrast.

! LIGHTER — Press [SCROLL DOWN] to lighten the display screen contrast.

Note: See Figure 5 for scroll key locations.