Specifications

KP-10 External Keypad Revision 1

Operation MN/KP10.IOM

1.1 PURPOSE AND FUNCTION

The KP-10 is a handheld keypad that provides portable, external access for controlling

Comtech EF Data Transceivers and Redundancy Switch Units.

The KP-10 is typically used for the initial set up, occasional changes to the configurations

and routine maintenance status of RFT and KST satellite terminal systems. When the

KP-10 is used with a redundant system, it is typically connected to a Comtech EF Data

Redundancy Switch Unit, RJU, or a Redundancy Junction Unit, RJU.

Note: Permanent monitoring of RFTs is accomplished with a PC and the M&C System Monitor

Software . Information about the M&C System Monitor Software is found in the

installation and operation manuals for Comtech EF Data CST and KST terminals.

1.1.1 COMPATIBLE EQUIPMENT

The KP-10 works with the following Comtech EF Data products:

! RFT 500 ! RFT 505

! RFT 700 ! RFT 1200

! RFT 1225 ! KST2000A/B/L

! RJU2000 ! RSU-503

! RSU-503L