Specifications

C-Band Transceiver Revision 1
LNA Installation MN/CSAT5060.IOM
8–6
8.2 INSTALLATION OF LNA ASSEMBLY
8.2.1 SINGLE-THREAD LNA INSTALLATION
Refer to Figure 8-5.
Figure 8-5. Installation of
Single-Thread LNA
The LNA is mounted to the OMT as follows:
• Waveguide Kit, CPR229, PN AS/0461
To install a single LNA to an antenna:
1. Remove the protective cover from the antenna OMT and LNA.
2. Install the appropriate gasket on the antenna end of the LNA.
a. If only one of the mounting surfaces has a groove, use the
half-thick gasket.
b. If both mounting surfaces have grooves, use the full thick
gasket.
3. Position the LNA (with gasket) in place on the antenna and
fasten using the supplied hardware.