Specifications

Digicast Media Router S2 Receiver CMR-5975 (MR-S2) Revision 3
Software Upgrade MN-CMR5975-IOM
A–2
IMPORTANT
A.2 Web Interface
Access the Administrative Configuration menu (Figure A-1):
a) In the
Update Firmware section, enter the Unit TFTP Server IP Address.
b) Select
Application or FPGA for the Image Type to be upgraded.
c) Enter a valid username and password in the
Login Required section (below
the
Update Firmware section) then select Update. The software update will
begin to download.
Do NOT power the unit down during the upgrade process.
d) When the update is complete, the message “Press any key to continue”
will be displayed.
e) Once the unit is upgraded, reset the unit by entering a valid username and
password in the first
Login Required section, then selecting Reset Unit.