Specifications

Digicast Media Router S2 Receiver CMR-5975 (MR-S2) Revision 3
Setting Up a Digicast Digital Satellite Receiver MN-CMR5975-IOM
D–3
D.2 Required Information for Setting Up a Digicast Satellite Receiver
To set up the Digicast receiver for receiving a live satellite feed, gather the following data:
1. Which frequency band is being used? @
C-Band
X-Band
Ku-Band
Ka-Band
2. Downlink frequency of the carrier from the satellite?
(MHz)
3. Local Oscillator of the LNB?
(MHz)
4. Which DVB Type? @
DVB-S
DVB-S2
5. Symbol Rate?
(Msps)
6. Which modulation of the carrier from the satellite? @
QPSK
8-PSK
16-APSK
7. FEC of the carrier from the satellite?
(Range = 1/4 to 9/10 FEC)
8. Pilots: @
On
Off
9. Which Filter Roll Off (for DVB-S2 Only)? @
20%
25%
35%
10. Secondary (backup) Carrier? @
Enabled
Disabled
11. Which LNB Power Requirement? @
None
13 VDC
18 VDC
12. Which Spectral Inversion mode? @
On
Off
On/Both
Off/Both