Product specifications

CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-42
C.5.6 BUC Commands
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for
Command or
Response to
Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
BUC Address
(L-Band Unit
only)
BAD= 2 bytes,
value of 01 to
15
Command or Query
Indicates the Block Up Converter (BUC) Address, in the form:
xx, where xx is between 01 and 15
Example: BAD=03
Note: This command is only valid when the FSK and BUC
power are enabled.
BAD=
BAD?
BAD*
BAD#
BAD^
BAD? BAD=xx
(see description of
arguments)
BUC Comms
Enable
(L-Band Unit
only)
BCE= 1 byte, value
of 0,1
Command or Query
Enables or disables communications, via the FSK link, with an
externally connected BUC, where:
0=Disabled
1=Enabled
Example: BCE=0 (Disabled)
BCE=
BCE?
BCE*
BCE#
BCE^
BCE? BCE=x
(see description of
arguments)
BUC Power
Control
(L-Band Unit
only)
BPC= 1 byte, value
of 0,1
Command or Query
0=Disable BUC DC Power
1=Enable BUC DC Power
BPC=
BPC?
BPC*
BPC#
BPC^
BPC? BPC=x
(see description of
arguments)
BUC 10 MHz
Reference
(L-Band Unit
only)
BFR= 1 byte, value
of 0,1
Command or Query
Enables or disables the 10 MHz frequency reference to the
BUC.
0=Disabled
1=Enabled
BFR=
BFR?
BFR*
BFR#
BFR^
BFR? BFR=x
(see description of
arguments)