Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
5.3.6.3 (SELECT:) UTIL: Æ ID
Edit Circuit ID: ( E)
------------------------
Edit the Circuit ID string, using the  arrow keys. Only the bottom line (0 to 24 characters)
is available. Selects the cursor position on the bottom line using the arrow keys, then edit the
selected character using the  arrow keys. The following characters are available:
<Space> ( ) * + - , . / 0-9 and A-Z
When the User has composed the string, press
ENTER.
5.3.6.4 (SELECT:) UTIL: ÆDisplay
Edit Display Brightness:
100% ( E)
Brightness levels of 25%, 50%, 75% or 100% are selectable. Edit the display brightness using
the ST arrow keys. Once the desired brightness has been set, press
ENTER.
5.3.6.5 (SELECT:) UTIL: Æ Firmware
IMPORTANT
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES ONLY. DO NOT
CHANGE AN IMAGE UNLESS INSTRUCTED TO DO SO BY COMTECH
EF DATA CUSTOMER SERVICE TECHNICIANS.
The sub-menus available through UTIL: Firmware permit the user to view information about the
CDM-710 internal firmware. The modem stores two complete firmware images, and the user can
select which image will be loaded the next time the unit reboots.
Firmware Images:
Info Select ( E)
Select either Infor or Select using the
W X arrow keys, then press ENTER.
5–55