Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
Loc 0 Contains Data !
Overwrite? NO YES (E)
The user must select No or Yes using the ◄ ► arrow keys, then press
ENTER. Selecting Yes
overwrites the existing configuration at the selected location.
(SELECT:) Save/Load: Æ Load
Load Config from Loc: 9
11:02:43 05/08/05 (ST E)
Using Loc: 9 as the example, if Load is selected and there is a configuration stored at the
selected location, what displays is similar to the preceding example. Note that the stored
configuration is identified with a date and time stamp.
If the selected location contains no data, what displays is similar to the next example:
Load Config from Loc: 9
Empty (ST E)
Select the location from where the current configuration is to be loaded using the ST arrow
keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location contains valid data, what displays is similar to the following example:
New Config has been
Loaded from Loc # (E)
Press
ENTER or CLEAR to return back to the previous menu.
If the selected location contains invalid data, what displays is similar to the next example:
Warning! Loc 9 Contains
No Data! (E)
Press
ENTER or CLEAR to return back to the previous menu.
5–53