Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
5.3.5 (SELECT:) Save/Load
Save/Load Configuration:
Save Load (E)
Note: When the unit is in Remote mode, and the User attempts to use this menu (i.e., by using
the ◄ ► arrow keys), the following message is displayed:
THIS UNIT IS CURRENTLY
IN REMOTE MODE!!
When in Local mode: Select Save or Load using the STarrow keys. The User should then
press
ENTER. The Save and Load submenus permit the User to store or load up to 10 different
modem configurations in a non-volatile memory of the modem.
(SELECT:) Save/Load: Æ Save
Save Config to Loc: 9
Empty (ST E)
Using Loc 9: as the example, if Save is selected and no configuration has been saved, the second
line reads ‘Empty’, as shown in the preceding example.
However, if the selected Loc: 9 already contains data, what displays is similar to the next
example:
Save Config to Loc: 9
01:02:43 05/08/05 (ST E)
The user is shown the time and date stamp of the previously stored configuration, for
identification purposes.
Select the location to where the current configuration is to be stored, using the ST arrow keys,
then press
ENTER. Locations 1 through 10 are available.
If the selected location does not contain a previously stored configuration, the following screen is
displayed:
New Config has been
Saved to Loc 9 (E)
However, if the selected location does contain a previously stored configuration, the following
screen is displayed:
5–52