Product specifications
CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If Alarm Mask: ÆIntfc2 is selected (valid only for the ASI Interface):
Intfc2 Alarms: TxClk
( E)
Operability of this menu and its submenus is the same as for the Alarm Mask: ÆIntfc1 menu
discussed previously.
5.3.2 (SELECT:) Monitor
Monitor: Alarms Rx_Stats
Event-Log
Alarms are reported under three main categories:
• Tx path alarms are displayed under the Tx Category
• Rx path alarms are displayed under the Rx Category
• Alarms common to the unit are available under the Unit selection
See Table 5.2 for additional information regarding alarms.
Select Alarms, Rx_Stats, or Event-Log using the ◄ ► arrow keys. The User should then press
ENTER.
5.3.2.1 (SELECT:) Monitor: Æ Alarms
Live Alarms: Transmit
Receive Unit ( E)
Select Transmit, Receive, or Unit using the ◄ ► arrow keys. The User should then press
ENTER.
If Live Alarms: Æ Transmit is selected:
TX Traffic: GBEI Card
PHY Not Connected (E)
This will only report if there are modulator errors, otherwise it will report “No Errors.” The User
should press
ENTER or CLEAR to return to the previous menu.
The alarm shown in the preceding display example usually indicates that the Ethernet data cable is
disconnected from the modem.
5–42