Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If Intfc2 Gigabit Egress: Æ IP is selected:
Intfc2 Egress IP:
Group SrcPort DestPort
This menu allows configuration of IP header fields for the egress packets.
Select Group, ScrPort, or DestPort using the ◄ ► arrow keys. The User should then press
ENTER.
If Intfc2 Egress IP: Æ Group is selected:
Intfc2 Egress Multicast:
239.010.010.010 (cb)
Enter the valid destination IP multicast group address for egress IP packets, using the ◄ ► arrow
keys to select the desired digit. The value of the digit is then changed using the ▲ ▼ arrow keys.
The User should then press
ENTER.
If Intfc2 Egress IP: Æ SrcPort is selected:
Intfc2 Egress Src Port:
01024 (cb)
Enter a valid UDP source port address for your network, using the ◄ ► arrow keys to select the
desired digit. The value of the digit is then changed using the ▲ ▼ arrow keys. The User should
then press
ENTER.
If Intfc2 Egress IP: Æ DestPort is selected:
Intfc2 Egress Dest Port:
01024 (cb)
Enter a valid UDP destination port address for the egress packet stream, using the ◄ ► arrow
keys to select the desired digit. The value of the digit is then changed using the ▲ ▼ arrow keys.
The User should then press
ENTER.
Media packets will be addressed to this UDP port; FEC packets (if FEC generation is enabled)
will be addressed to (UDP destination port +2).
5–36