Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If Intfc2 Gigabit Egress: Æ Ena/Dis is selected:
Intfc2 Egress Enable:
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys. The User should then press
ENTER.
Select Enable to enable reception of the MPEG transport stream from the WAN. This also
enables transmission of the IP-encapsulated MPEG packets to the LAN (egress). Enter Disable to
turn off egress packets to the LAN.
If Intfc2 Gigabit Egress: Æ FEC is selected:
Intfc2 FEC:
Ena/Dis Matrix ( E)
This menu allows enabling and configuration of the SMPTE 2022 / Pro-MPEG COP3 FEC
stream to the LAN.
Select Ena/Dis or Matrix using the
◄ ► arrow keys. The User should then press ENTER.
If Intfc2 Gigabit FEC: Æ Ena/Dis is selected:
Intfc2 Egress FEC:
Enable Disable
Select Enable or Disable using the
◄ ► arrow keys. The User should then press ENTER.
Select Enable to generate SMPTE 2022 / Pro-MPEG COP3 FEC IP packets to the LAN, in
addition to the stream of IP-encapsulated MPEG packets. Enter Disable to run off the generation
of FEC packets to the LAN.
If Intfc2 Gigabit FEC: Æ Matrix is selected:
Intfc2 Egress FEC Matrix:
Length = 10, Depth = 10
Configure the dimension of the egress FEC matrix, using the ◄ ► arrow keys to select the
desired digit. The value of the digit is then changed using the ▲ ▼ arrow keys. The User should
then press
ENTER. Valid values for Length and Depth are as follows:
• L * D </= 100
• 1 </= L </= 20
• 4 </= D </= 20
5–35