Product specifications

CDM-710 Broadcast Satellite Modem Revision 10

Front Panel Operation MN/CDM710.IOM

If Intfc1 Tx Æ Enable is selected:

Intfc1 Tx Enable:

Enable Disable (efE)

Select Enable or Disable, using the

◄ ► arrow keys. The User should then press ENTER.

Select Enable to activate the Tx side of this interface. Select Disable to deactivate the Tx side

and set the data rate to 0.

(CONFIG:) Intfc1 HSSI: Æ Rx

Intfc1 Rx:

Data Buffer Clock Enable

Select Data, Buffer, Clock or Enable, using the

◄ ► arrow keys. The User should then press

ENTER.

If Intfc1 Rx: Æ Data is selected:

Intfc1 Rx Data:

Datarate Invert (efE)

Select Datarate or Invert, using the

◄ ► arrow keys. The User should then press ENTER.

If Intfc1 Rx Data: Æ Datarate is selected:

Intfc1 Data Rate:

Rx: 032.000000 Mbps

This is a ‘status only’ message indicating the data rate of the received MPEG-2 transport stream.

Press

ENTER or CLEAR to return to the previous menu.

If Intfc1 Rx Data: Æ Invert is selected:

Intfc1 Rx Data Invert:

Normal Inverted (efE)

Select Normal or Inverted, using the

◄ ► arrow keys, to control data inversion (added for

compatibility with certain older equipment). The User should then press

ENTER.

5–28