Product specifications

CDM-710 Broadcast Satellite Modem Revision 10

Front Panel Operation MN/CDM710.IOM

(CONFIG:) Intfc1 HSSI: Æ Tx

Intfc1 Tx

Data Clock Enable (efE)

Select Data, Clock, or Enable using the

◄ ► arrow keys. The User should then press ENTER.

If Intfc1 Tx Æ Data is Selected:

Intfc1 Tx Data:

Datarate Invert (efE)

Select Datarate or Invert, using the

◄ ► arrow keys. The User should then press ENTER.

If Intfc1 Tx Data: Æ Datarate is selected:

Intfc1 Data Rate:

Tx: 032.000000 Mbps

This is a ‘status only’ message which indicates the data rate of the transmit MPEG-2 transport

stream. Press

ENTER or CLEAR to return to the previous menu.

If Intfc1 Tx Data: Æ Invert is selected:

Intfc1 Tx Data Invert:

Normal Inverted (efE)

Select Normal or Inverted, using the

◄ ► arrow keys to control data inversion (added for

compatibility with certain older equipment). The User should then press

ENTER.

If Intfc1 Tx Æ Clock is Selected:

Intfc1 Tx Clock:

Normal Inverted (efE)

Select Normal or Inverted, using the

◄ ► arrow keys, to control clock inversion (added for

compatibility with certain older equipment). The User should then press

ENTER.

5–27