Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
5–25
If Intfc1 ASI Tx: Æ Ena/Dis is selected:
Intfc1 ASI Tx:
Enable Disable ( E) 
elect Enable or Disable using the ◄ ► arrow keys. The User should then press
ENTER.
de
If Intfc1 ASI Tx: Æ Frame is selected:
S
Select Enable to activate the Tx side of this interface. Select Disable to deactivate the Tx si
and set the data rate to 0.
Intfc1 ASI Tx Frame:
188 204 ( E)
elect either 188 or 204, using the
◄ ► arrow keys, to enable either the 188 or 204 sync mode.
(CONFIG:) Intfc1 ASI: Æ Rx
S
The User should then press
ENTER.
Intfc1 ASI Rx:
Ena/Dis Frame ( E)
elect Ena/Dis or Frame using the ◄ ► arrow keys. The User should then press
ENTER.
Intfc1 ASI Rx: Æ Ena/Dis is selected:
S
If
Intfc1 ASI Rx:
Enable Disable ( E) 
elect Enable or Disable using the ◄ ► arrow keys. The User should then press
ENTER.
elect Enable to activate the Rx side of this interface. Select Disable to deactivate the Rx side
Frame is selected:
S
S
and set the data rate to 0.
If
Intfc1 ASI Rx Frame:
188 204 ( E)
Select either 188 or 204, using the
◄ ► arrow keys, to enable either the 188 or 204 sync mode.
The User should then press
ENTER.