Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If S2-G/S2-TS is selected, the (CONFIG:) Tx Æ Mode Æ S2-G/S2-TS option becomes
available:
Transport Mode: Generic
TransportStream (E)
IMPORTANT
This command applies only for a HSSI interface in DVB-S2 mode. .
The default Transport Mode is TransportStream, regardless of mode or interface type. Select
Generic or TransportStream using the ◄ ► arrow keys. The User should then press
ENTER.
(CONFIG:) Tx Æ Frequency
TX Freq: 0140.0000 MHz
(E)
Edit the TX IF Frequency by selecting the digit to be edited, using the ◄ ► arrow keys. The value
of the digit is then changed using the ▲ ▼ arrow keys. The User should then press
ENTER.
70/140 MHz
The ranges of frequencies are from 52 to 88 MHz and from
104 to 176 MHz with a resolution of 100 Hz.
L-Band
The range is 950 to 1950 MHz with 100 Hz resolution.
CAUTION
The bandwidth of the modulated Tx carrier must stay within the IF frequency
range. The modem disallows settings that exceed the range, and will turn off
the Tx Carrier.
(CONFIG:) Tx Æ Pwr
TX Power: Level
On/Off Imped (E)
Select Level, On/Off, or Imped using the ◄ ► arrow keys. The User should then press
ENTER.
IMPORTANT
The Imped(ance) selection is only available/displayed when the 70/140 MHz
Modulator card is installed.
5–17