Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If SNMP Trap IP Address: Æ IP1 or IP2 is selected:
Trap ID #X:
000.000.000.000 ( E )
Edit the SNMP Trip IP#1 or IP#2 Address by selecting the digit to be edited, using the ◄ ► arrow
keys. The value of the digit is then changed using the ▲ ▼ arrow keys. The User should then press
ENTER.
If SNMP Trap IP Address: Æ Version is selected:
Trap Version:
SNMPv1 SNMPv2 (E )
Select SNMPv1 or SNMPv2 using the ◄ ► arrow keys. The User should then press
ENTER.
5.3.1.2 (CONFIG:) Tx
IMPORTANT
The Scram(bler) selection only appears if the Mode selection is DVB-S2.
Tx: FEC Mod Code SymRate
Mode Freq Pwr Scram(E)
Select FEC, Mod, Code, SymRate, Mode, Freq, Pwr, or Scram, using the ◄ ► arrow keys.
The User should then press
ENTER.
(CONFIG:) Tx Æ FEC
Tx FEC:
Viterbi + Reed-Solomon (E)
This is a ‘status only’ message, and its appearance is dependent upon the selection made under
the (CONFIG:) Tx Æ Mode menu.
For DVB-S2 Mode only:
Tx FEC:
LDPC + BCH (E)
Press
ENTER or CLEAR to return to the previous menu.
5–11