Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
If Ethernet CONFIG: Æ Address is selected:
Ether IP Address/Range:
192.168.001.001/24 ()
Edit the IP Address/Range address by selecting the digit to be edited, using the ◄ ► arrow keys.
The value of the digit is then changed using the ▲ ▼ arrow keys. The range is adjustable from
08 to 30. The User should then press
ENTER.
If Ethernet CONFIG: Æ MAC is selected:
M&C Port MAC Address:
00-06-B0-00-56-33
This is a ‘status only’ display. The User should then press
ENTER.
Note: The preceding address is representative of a typical MAC address.
If Ethernet CONFIG: Æ SNMP is selected:
SNMP:
Community Traps (LRE)
This is a ‘status only’ message. Submenus enable setting of the destination IP address for SNMP traps.
Press
ENTER or CLEAR to return to the previous menu.
If SNMP Æ Community is selected:
SNMP Community:
Read ( E )
If Community ÆRead is selected:
Read Community: ( E )
public
If SNMP Æ Traps is selected:
SNMP Trap IP Address:
IP1 IP2 Version
Select IP1, IP2, or Version using the ◄ ► arrow keys, then press
ENTER.
5–10