Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Front Panel Operation MN/CDM710.IOM
5.2 Opening Screen
The opening ‘welcome screen’ shown here is representative
of what displays whenever power is first applied to the unit
(the Firmware Version may differ). Pressing any key takes
the User to the top-level Select menu.
IMPORTANT
For purposes of this documentation, a CDM-710 unit is shown – the unit in
use could be either a CDM-710 or CDM-710L Broadcast Satellite Modem.
5.3 SELECT: (Main) Menu
SELECT: Config Monitor
Test Info Save/Load Util
Move the cursor to the desired choice using the ◄ ► arrow keys, then press
ENT. The following
table describes the function of each menu branch (along with the section in this chapter that
provides information on that branch and its accompanying submenus):
Selection
Menu Branch Description
Config
(Configuration) Provides the User selections for the desired Interface,
Transmit, and Receive operations
Monitor
Permits the User to monitor the alarm status of the unit, to view the log of
stored events, and to display the Receive Parameters screen.
Test
Permits the User to configure the modem into one of several Test modes,
example: CW and Loopback
Info
(Information) Provides a summary/display of the Interface, Transmit,
Receive, and M&C configurations.
Save/Load
Permits the User to save and retrieve up to 10 different modem
configurations.
Util
(Utility) Permits the User to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display brightness, etc.
5–6