Product specifications

CDM-710 Broadcast Satellite Modem Revision 10

Front Panel Operation MN/CDM710.IOM

5.1.4 Menu Matrix

Para Description Remarks

5.2 Opening Screen

5.3 Select (Main) Menu Select: Config; Monitor; Test; Info; Save/Load; Util

5.3.1 Configuration Select: Remote; Tx; Rx: Int1; Int2; Ref, Aux, Alarms

5.3.1.1 (CONFIG:) Remote Control Local Remote Select: Local; Serial; Ethernet

5.3.1.2 (CONFIG:) Tx Select: FEC; Mod; Code; SymRate; Mode; Freq, Pwr; Scram

5.3.1.3 (CONFIG:) Rx Select: FEC; Dem; Code; SymRate; Mode; Freq; Eb/No, PLL

5.3.1.4 (CONFIG:) Intfc1 (CDI-40 ASI only) Select: Tx; Rx; Config

5.3.1.5 (CONFIG:) Intfc1 (CDI-60 HSSI) Select Tx, Rx, CTS/RTS

5.3.1.6 (CONFIG:) Intfc2 (CDI-70 Gigabit Ethernet

only)

Select: Ingress; Egress; Man; Stats

5.3.1.7 (CONFIG:) Ref

5.3.1.8 (CONFIG:) Aux Select: Ena/Dis; Force (1:1)

5.3.1.9 (CONFIG:) Alarms Select: Tx; Intfc1; Intfc2

5.3.2 Monito

Select: Alarms; Rx_Stats; Event-Log

5.3.2.1 (Monitor:) Alarms Select: Transmit; Receive; Unit

5.3.2.2 (Monitor:) Rx Stats

5.3.2.3 (Monitor:) Event-Log Select: View; Clear-All

5.3.3 Test Select: Mode; TestPatterns

5.3.4 INFO Select: Rem; Tx; Rx; Intfc1; Intfc2

5.3.5 Save/Load Select: Save; Load

5.3.5.1 Save/Load: Save

5.3.5.2 Save/Load: Load

5.3.6 Utility Select: RT-CLK; Ref; ID; Display; Firmware; FAST

5.3.6.1 Utility: RT-Clk

5.3.6.2 Utility: Ref

5.3.6.3 Utility: ID

5.3.6.4 Utility: Display

5.3.6.5 Utility: Firmware Select: Info

5.3.6.6 Utility: FAST Select: Cnfg; View

Notes:

1. The Pilot selection appears if the Mode selection is DVB-S2.

2. Refer to CONFIG: Tx Æ SymRate for the Data Rate table.

3. The Impedance selection appears when the 70/140 MHz Modulator card is installed.

4. The Scrambler selection appears if the Mode selection is DVB-S2.

5–5