Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–71
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Gigabit Source
IP Address
GSI= 17 bytes Command or Query.
Gigabit Source IP Address
s=Slot (1, 2)
m=Multicast Stream (1, 2)
i=IP Address
GSI =
GSI #
GSI?
GSI *
GSI?sm GSI=smiii.iii.iii.iii
Gigabit Primary
Stream
GSP= 2 bytes Command or Query.
Gigabit Primary Stream
s=Slot (1, 2)
m=Multicast Stream (1, 2)
GSP=
GSP#
GSP?
GSP*
GSP?s GSP=sm
Gigabit Stream
Mode
GSM= 2 bytes Command or Query.
Gigabit Stream Mode
s=Slot (1, 2)
m=Mode
1=Single Stream
2=Dual Stream (Redundancy Mode)
GSM=
GSM#
GSM?
GSM*
GSM?s GSM=sm
Gigabit Stream
Timeout
GTO= 3 bytes Command or Query.
Gigabit Stream Timeout (Only used when in Dual Stream Mode).
s=Slot (1, 2)
t=Timeout in 100 mS intervals (0 – 10)
GTO=
GTO#
GTO?
GTO*
GTO?s GTO=stt
Gigabit Stream
Timeout Mode
GTM= 2 bytes Command or Query.
Gigabit Stream Timeout Mode (Only used when in Dual Stream
Mode)
s=Slot (1, 2)
m=Mode
0 = Non-revertive
1 = Revertive
***When in redundancy mode (GSM = 1 ), this parameter
controls whether the Gigabit Interface switches back and forth
between the two input streams for a valid MPEG stream.
Revertive means the interface will switch back and forth between
the two streams. Non-revertive is a latching scheme where the
interface will only switch to the secondary stream.
GTM=
GTM#
GTM?
GTM*
GTM?s GTM=sm