Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–70
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Firmware
Revisions
N/A 1 byte Query Only.
Query the version information of the system. Where:
i = Bulk Image number (1 or 2)
a = Firmware Image
b = Firmware Revision
c = Firmware Date
Example: FRW?1
FRW?
FRW*
FRW#
FRW?i FRW={CR}Boot:{CR}a,
b,c{CR}Bulki:{CR}a,b,c
{CR}a,b,c…
Gigabit FEC
Enable
GFE= 2 bytes Command or Query.
Enables the Gigabit FEC mode.
s=Slot (1, 2)
n=Enable/Disable
0=Disabled
1=Enabled
GFE=
GFE#
GFE?
GFE*
GFE?s GFE=sn
Gigabit FEC
Base Port
GFP= 6 bytes Command or Query.
Gigabit FEC Base Port number
s=Slot (1, 2)
n=Port Number (0 – 65535)
GFP=
GFP#
GFP?
GFP*
GFP?s GFP=snnnnn
Gigabit
Management IP
Address and
Subnet
GIP= 19 bytes Command or Query.
Gigabit Management IP address and subnet mask.
s=Slot (1, 2)
i=IP Address
n=Netmask
GIP=
GIP#
GIP?
GIP*
GIP?s GIP=siii.iii.iii.iii.nn
Gigabit
Multicast
Address
GMI= 17 bytes Command or Query.
Gigabit Multicast Address
s=Slot (1, 2)
m=Multicast Stream (1, 2)
i=IP Address
GMI=
GMI#
GMI?
GMI*
GMI?sm GMI=smiii.iii.iii.iii
Gigabit Active
Stream
N/A 2 bytes Command or Query.
Gigabit Active Stream
s=Slot (1, 2)
m=Stream (1, 2)
GSA=
GSA#
GSA?
GSA*
GSA?s GSA=sm