Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–51
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Data Rate N/A 10 bytes Query Only.
Composite Tx Data rate, in kbps.
Resolution=1 bps.
Example: TDR=002047.999 (which is 2047.999 kbps)
TDR?
TDR*
TDR#
TDR? TDR=xxxxxx.xxx
Tx FEC Type N/A 1 byte Query Only.
Tx FEC coding type, where:
0=Viterbi + Reed-Solomon
1=LDPC
( FEC is dependent on the TX Mode Type. )
Example: TFT=1 (which is LDPC coding)
TFT?
TFT*
TFT#
TFT? TFT=x
Tx Interface
Enable
TIE= 2 bytes Command or Query.
Interface Slot Enable/Disable, where:
s=Defines which interface slot (1 or 2)
x=Tx Interface Status, where:
0=Disabled
1=Enabled
Ex: TIE =11 (Enables transmit interface)
TIE=
TIE?
TIE*
TIE#
TIE?s TIE=sx
Tx Alpha
Rolloff
TAR= 1 byte Command or Query.
Tx Alpha Rolloff, where:
0 = 20%
1 = 25%
2 = 35%
Example: TAR=0 (which is a Tx Alpha Rolloff of 20%)
TAR=
TAR?
TAR*
TAR#
TAR? TAR=x