Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–48
A.6.3 Modem
Priority System = TMM (Highest priority), TMD, TCR, and TSR (Lowest Priority). Any change to a higher priority parameter can override any
of the parameters of lower priority.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Mode TMM= 1 byte Command or Query.
Tx Mode, where:
0=DVB-S
1=DVB-S2
2=DVB-DSNG
Example: TMM=0 (which is DVB-S mode)
*NOTE: Please refer to Chapter 8 for available code rates,
modulation types, and symbol rates for each mode.
TMM=
TMM?
TMM*
TMM#
TMM? TMM=x
Tx Transport
Mode
TTM= 1 byte Command or Query.
Sets the transport mode for DVB-S2 mode.
0 = Generic Mode
1 = Transport Stream (Default)
(Note: Command applies only with DVB-S2 and HSSI. For any
other mode, set TTM to 1)
Example: TTM=1 (Transport Mode)
TTM=
TTM?
TTM*
TTM#
TTM? TTM=x