Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–43
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Gateway
Address
IPG= 15 bytes Command or Query.
Used to set the Gateway IP addess for the
10/100 Base Tx Ethernet management port, in the format:
xxx.xxx.xxx.xxx, where:
xxx.xxx.xxx.xxx is the IP address
Example: IPG = 010.006.030.001
IPG=
IPG?
IPG*
IPG#
IPG? IPG = xxx.xxx.xxx.xxx
Interface Type N/A 2 bytes Query Only.
Interface Type, where:
s=Defines which interface slot (1 or 2)
x=Defines the interface type, where:
0=ASI
1=Gigabit Ethernet
2=HSSI
Example: ITF?1
ITF?
ITF*
ITF#
ITF?s ITF=sx
Local/Remote
Status
LRS= 1 byte Command or Query.
Local/Remote status, where:
0=Local
1=Serial
2=Reserved
3=Ethernet
Example: LRS=1 (which is remote Serial)
LRS=
LRS?
LRS*
LRS#
LRS? LRS=x
Unit MAC
Address
N/A 12 bytes Query Only.
MAC address of the unit, reported in hexadecimal.
Example: MAC=0006B000D2A7 (The MAC address of the unit
is 00:06:B0:00:D2:A7 )
MAC?
MAC*
MAC#
MAC? MAC=AABBCCDDEEF
F