Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–31
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx FEC Type N/A 1 byte Query Only.
Rx FEC coding type, where:
0=Viterbi + Reed-Solomon
1=LDPC
( FEC is dependent on the RX Mode Type. )
Example: RFT=1 (which is LDPC coding)
RFT?
RFT*
RFT#
RFT? RFT=x
Rx Interface
Enable
RIE= 2 bytes Command or Query.
Interface Slot Enable/Disable, where:
s=Defines which interface slot (1 or 2)
x=Rx Interface Status, where:
0=Disabled
1=Enabled
Ex: RIE =11 (Enables receive interface)
RIE=
RIE?
RIE*
RIE#
RIE?s RIE=sx
Rx Alpha
Rolloff
RAR= 1 byte Command or Query.
Rx Alpha Rolloff, where:
0 = 20%
1 = 25%
2 = 35%
Example: RAR=0 (which is a Rx Alpha Rolloff of 20%)
RAR=
RAR?
RAR*
RAR#
RAR? RAR=x
Rx Gold Code
Sequence Index
RGS= 6 bytes Command or Query.
Rx Gold Code Sequence Index:
xxxxxx = Gold Code Sequence index ( 0 to 262141 )
Example: RGS=189063
*NOTE: Only valid in DVB-S2 mode.
RGS=
RGS?
RGS*
RGS#
RGS? RGS=xxxxxx