Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–15
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Transport
Mode
TTM= 1 byte Command or Query.
Sets the transport mode for DVB-S2 mode.
0 = Generic Mode
1 = Transport Stream (Default)
(Note: Command applies only with DVB-S2 and HSSI. For any
other mode, set TTM to 1)
Example: TTM=1 (Transport Mode)
TTM=
TTM?
TTM*
TTM#
TTM? TTM=x
Tx Clock
Invert
TCI= 2 bytes Command or Query.
Invert Transmit Clock, where:
s=Defines which interface slot ( 1 or 2 )
x=Invert Transmit Clock, where:
0=Normal
1=Inverted
(Note: Command valid Only with HSSI)
Example: TCI = 11 (selects Inverted TX Clock, Slot 1)
TCI =
TCI?
TCI *
TCI #
TCI?s TCI =sx
(see description of
arguments)