Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–14
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx ASI
Bandwidth
TAB= 2 bytes Command or Query.
Tx ASI Bandwidth, where:
s=Defines which interface slot (1 or 2)
x=Defines ASI Bandwidth, where:
0=Wide
1=Narrow
Example: TAB=11 (selects Narrow bandwidth )
TAB=
TAB?
TAB*
TAB#
TAB?s TAB=sx
Tx Interface
Port
TIP= 2 bytes Command or Query.
Indicates which port on the interface is to be used (ASI card
only), in the form: sp
Where:
s = interface slot (1 to 2)
p = interface port/channel (1 to 4)
1 = J4
2 = J5
Example: TIP=11 ( selects port J4 on interface slot 1 )
TIP=
TIP?
TIP*
TIP#
TIP?s TIP=sp
Tx Data Invert TDI= 2 bytes Command or Query.
Invert Transmit Data, where:
s=Defines which interface slot ( 1 or 2 )
x=Invert Transmit Data, where:
0=Normal
1=Inverted
(Note: Command valid Only with HSSI)
Example: TDI = 111 (selects Inverted TX Data)
TDI =
TDI?
TDI *
TDI #
TDI?sc TDI =sx
(see description of
arguments)