Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Remote Control MN/CDM710.IOM
A–13
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Frame Size TFS= 1 byte Command or Query.
Tx Frame Size Long/Short selection, where:
0=Short,
1=Long
Example: TFS =0 (which is Short Frame Size)
*NOTE: Setting only valid in DVB-S2 mode.
TFS =
TFS?
TFS *
TFS #
TFS? TFS =x
Tx Pilot On/Off TPI= 1 byte Command or Query.
Tx Pilot On/Off selection, where:
0=Off,
1=On
Example: TPI=0 (which is Pilot Off)
*NOTE: Only valid in DVB-S2 mode.
TPI=
TPI?
TPI*
TPI#
TPI? TPI=x
Tx Location of
the Pilot
TLP= 1 byte Command or Query.
Tx Pilot On/Off selection, where:
0=Average,
1=Peak
Example: TLP=0 (which is Pilot Average)
*NOTE: Only valid in DVB-S2 mode.
TLP=
TLP?
TLP*
TLP#
TLP? TLP=x
Tx Spectrum
Invert
TSI= 1 byte Command or Query.
Tx Spectrum Invert selection, where:
0=Normal
1=Tx Spectrum Inverted
Example: TSI=0 (which is normal)
TSI=
TSI?
TSI*
TSI#
TSI? TSI=x