Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
1000 Base-T (GbE) Interface MN/CDM710.IOM
11.6 CDI-70 1000 Base-T Ethernet (GbE) Interface Card Removal and Installation
WARNING
Ensure the unit is in a Power Off mode. Serious injury or
damage to the equipment could result.
Figure 11-3. CDI-70 1000 Base-T Ethernet (GbE) Interface Card
IMPORTANT
CDI-70 Interface Card can be located in Slot 1 or Slot 2.
Removal of the CDI-70 Interface Card:
Step Procedure
1 Disconnect the RJ-45 cable from the interface card.
2 Remove the two screws securing the interface card.
3 Pull out the interface card.
Installation of the CDI-70 Interface Card:
Step Procedure
1 Insert the CDI-70 Interface Card into the desired slot.
2 Ensure that the interface card is secured to the internal card.
3 Secure the CDI-70 using two screws.
4 Connect the RJ-45 cable to the interface card.
11–9