Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
SNMP Interface MN/CDM710.IOM
9.5.3 Remote Ethernet Group
This group provides the parameters of the modem’s Ethernet interface. This includes the IP
Address and Mask, IP Gateway, and MAC Address.
9.5.4 Ethernet SNMP Group
This group provides the parameters necessary to configure and operate the SNMP interface. This
includes the System Name, Administrator and Location as well as the Community Strings.
9.5.5 Interface FEC Group
This group provides information regarding unit’s two FEC Slots and the capabilities of the cards
loaded in those slots.
9.5.6 Modem Reference Group
This group provides the parameters for selection of the modem’s frequency reference.
9.5.7 Monitor Group
This group provides access to the units current Alarm/Fault Status as well as a table to access the
Stored Alarms/Events.
9.5.8 Test Group
This group provides access to the units test modes.
9.5.9 Save/Load Group
This group provides control of the unit’s configuration Store and Load capabilities.
9.5.10 Utilities Group
This group provides access to the unit’s Real-Time clock (Time and Date), Internal Reference
Adjustment, Circuit ID, and Front Panel Display Brightness Control.
9–4