Product specifications

CDM-710 Broadcast Satellite Modem Revision 10
Summary of Specifications MN/CDM710.IOM
Description Requirements
1:1 Redundancy Built in controller for operation with optional CRS-170A for L-Band and CRS-180 for
70/140 MHz
Fault Form C, see connector pinout information and notes
Configuration Non-volatile for 1-year minimum and returns upon power up.
External Tx Carrier Off TTL low signal – path bypasses microprocessor (Alarm Conn)
Agency Approval Safety, conducted and radiated emissions and Immunity sufficient for CE certification
8.2 Environmental and Physical
Description Requirements
Temperature:
Operating
Storage
0 to 50ºC (32 to 122ºF)
-20 to 70ºC (-4 to 158ºF)
Humidity:
Operating
Storage
95% maximum, non-condensing
99% maximum, non-condensing
Power Supply Input 100-240AC 50/60Hz, auto-ranging
Power Supply Input -48VDC
Fuse AC, T2.00A, 5x20 mm.250VAC time lag
DC, T6.25A, 6.3x32mm.(3AG), 250VAC time lag
Power Consumption < 75 W, 55W typical
AC Power Cord Retainer Standard
Modular design Simplex or Duplex
Dimensional Envelope, 1RU 1.72H x 19.00W x 18.65D inches
(4.37H x 48.26W x 47.37D cm)
Weight 15lbs (6.8 kg)
Keypad and Display 2 lines x 24-character display with up, down, left, right, Clear, and Enter keys.
8–2