Product specifications

CDM-710G High-Speed Satellite Modem Revision 1
Remote Control MN-CDM710G
A–22
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Unit Alarm
Mask
MSK= 13 bytes Command or Query.
Alarm mask conditions, in form abcdefghijkLmxxx, where:
a=Tx Cable Slot 1
b=Tx AIS Slot 1
c=Rx AIS Slot 1
d=Bufferslip Alarm Slot 1
e=External Clock Alarm Slot 1
f=Tx Cable Slot 2
g=Tx AIS Slot 2
h=Rx AIS Slot 2
i=Bufferslip Alarm Slot 2
j=External Clock Alarm Slot 2
k=EBNO Alarm
L=BER Alarm
m=Rx AGC Alarm
xxx-spares.
Mask ( Alarm=0, Fault = 1,Masked =2)
Example: MSK=110101100000xxx
( Alarm masks for interface slot ,Slot 2 ,Ebno, Rx Agc)
MSK=
MSK?
MSK*
MSK#
MSK? MSK=abcdefghijkLmxxx
Number of
Unread stored
Events
N/A 3 bytes Query Only.
Unit returns the Number of stored Events, which remain Unread, in the
form xxx.
Note: This means unread over the remote control.
Example: NUE=126
NUE?
NUE*
NUE#
NUE? NUE=xxx
Rx Alpha Rolloff RAR= 1 byte Command or Query.
Rx Alpha Rolloff, where:
0 = 20%
1 = 25%
2 = 35%
Example: RAR=0 (which is a Rx Alpha Rolloff of 20%)
RAR=
RAR?
RAR*
RAR#
RAR? RAR=x
Rx Buffer Size RBS= 5 bytes Command or Query.
Rx Buffer Size (in milliseconds), where:
s=Defines which interface slot ( 1 or 2 )
xx.x= Rx Buffer Size,
HSSI = 5.0 to 32.0 ms, in 0.1 ms steps
E3T3STS1
E3 mode = 0.5 to 61.0 ms, in 0.5 ms steps
T3 mode = 0.5 to 44.0 ms, in 0.5 ms steps
STS1 mode = 0.5 to 40.0 ms, in 0.5 ms steps
GBEI = N/A
Example: RBS=130.0 (selects 30.0 ms on interface 1)
RBS=
RBS?
RBS*
RBS#
RBS?s RBS=sxx.x
(see description of
arguments)