Product specifications

CDM-710G High-Speed Satellite Modem Revision 1
Front Panel Operation MN-CDM710G
6–32
• Second, this is the IP address that will be used in the event that new firmware is
provided by CEFD for the CDI-70 Gigabit Ethernet interface.
To edit, use the
W X arrow keys to select the digit, then use the ST arrow keys to change the
value of the digit. Press
ENTER when done.
(CONFIG:) Intfc2 Gigabit Ethernet Æ Stats
Intfc1 Statistics:
View Clear (E)
Select View or Clear using the W X arrow keys, then press ENTER.
If Intfc1 Statistics: Æ View is selected:
Intfc1 Statistics:
FPGA LAN WAN MNG ALL
Select FPGA, LAN, WAN, MNG, or ALL using the W X arrow keys, then press ENTER. The
available statistics for the Gigabit Ethernet Interface, as depicted in these example screen shots,
are shown in Table 6-3 – e
xamples of these read only displays are as follows:
If Intfc1 Statistics: Æ FPGA is selected:
FPGA Link Errors
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics: Æ LAN is selected:
LAN Good Octets(Out)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics: Æ WAN is selected:
WAN Good Octets(Out)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics: Æ MNG is selected:
MNG Good Octets(In)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics: Æ ALL is selected:
FPGA Link Errors
00000000000000000000 (▲ ▼ E)