Product specifications

CDM-710G High-Speed Satellite Modem Revision 1

Front Panel Operation MN-CDM710G

6–28

If Intfc1 Tx Æ Enable is selected:

Intfc1 Tx Enable:

Enable Disable (E)

Using the W X arrow keys, select Enable to activate the Tx side of this interface, or select Disable

to de-activate the Tx side and set the Data Rate to 0. Press

ENTER when done.

(CONFIG:) Intfc1 HSSI Æ Rx

Intfc1 Rx:

Data Buffer Clock Enable

Select Data, Buffer, Clock, or Enable using the W X arrow keys, then press ENTER.

If Intfc1 Rx: Æ Data is selected:

Intfc1 Rx Data:

Datarate Invert (E)

Select Datarate or Invert using the W X arrow keys, then press ENTER.

If Intfc1 Rx Data: Æ Datarate is selected:

Intfc1 Data Rate:

Rx: 032.000000 Mbps

This is a read-only status message that indicates the Data Rate of the received MPEG-2 transport

stream. Press

ENTER or CLEAR to return to the previous menu.

If Intfc1 Rx Data: Æ Invert is selected:

Intfc1 Rx Data Invert:

Normal Inverted (E)

To control data inversion (added for compatibility with certain older equipment), select Normal

or Inverted using the

W X arrow keys, then press ENTER.

If Intfc1 Rx Æ Buffer is selected:

Intfc1 Rx Buffer:

Size Recenter (E)

Select Size or Recenter using the W X arrow keys, then press ENTER.