Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–34
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ FEC Æ Matrix
Intfc2 Egress FEC Matrix:
Length = 10, Depth = 10
To configure the dimension of the egress FEC matrix, first use the ◄ ► arrow keys to
select the desired digit to edit, then use the ▲ ▼ arrow keys to change the value of that
digit. Press
ENTER when done.
Valid values for Length and Depth are as follows:
• L * D ≤ 100
• 1 ≤ L ≤ 20
• 4 ≤ D ≤ 20
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ IP
Intfc2 Egress IP:
Group SrcPort DestPort
To allow configuration of IP header fields for the egress packets, select Group, ScrPort, or
DestPort using the ◄ ► arrow keys, then press
ENTER.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ IP Æ Group
Intfc2 Egress Multicast:
239.010.010.010 ()
To enter a valid destination IP Multicast Group Address for egress IP packets, first use
the ◄ ► arrow keys to select the desired digit to edit, then use the ▲ ▼ arrow keys to
change the value of that digit. Press
ENTER when done.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ IP Æ SrcPort
Intfc2 Egress Src Port:
01024 ()
To enter a valid UDP Source Port Address for the network, first use the ◄ ► arrow keys
to select the desired digit to edit, then use the ▲ ▼ arrow keys to change the value of
that digit. Press
ENTER when done.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ IP Æ DestPort
Intfc2 Egress Multicast:
01024 ()
To enter a valid UDP Destination Port Address for the egress packet stream, first use the
◄ ► arrow keys to select the desired digit to edit, then use the ▲ ▼ arrow keys to
change the value of that digit. Press
ENTER when done.