Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–33
(CONFIG: Intfc2 Gigabit Ethernet) Ingress Æ Str Æ Timeout
Intfc2 Stream Timeout
0500 mS
For use in Dual Stream Mode only: Assign the period (in 100 mS increments) for a
primary connection failure to be present before switchover to the secondary connection
occurs by using the ▲ ▼ arrow keys. Press
ENTER when done.
(CONFIG: Intfc2 Gigabit Ethernet) Egress
Intfc2 Gigabit Egress:
Ena/Dis FEC IP (E)
Select Ena/Dis, FEC, or IP using the ◄ ► arrow keys, then press ENTER.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ Ena/Dis
Intfc2 Egress Enable:
Enable Disable
Select Enable or Disable using the ◄►arrow keys, then press ENTER. Enable is selected to
allow reception of the IP-encapsulated MPEG packets to the LAN (egress). Disable is selected
to turn off the egress packets to the LAN.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ FEC
Intfc2 FEC
Ena/Dis Matrix (E)
This menu allows enabling and configuration of the SMPTE 2022 / Pro-MPEG COP3 FEC
stream to the LAN. Select Ena/Dis or Matrix using the ◄ ► arrow keys, then press
ENTER.
(CONFIG: Intfc2 Gigabit Ethernet) Egress Æ FEC Æ Ena/Dis
Intfc2 Egress FEC:
Enable Disable
Select Enable or Disable using the ◄ ► arrow keys, then press ENTER. Enable is
selected to generate SMPTE 2022 / Pro-MPEG COP3 FEC IP packets to the LAN, in
addition to the stream of IP-encapsulated MPEG packets. Disable is selected to run off
the generation of FEC packets to the LAN.