Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–29
(CONFIG: Intfc1 HSSI) Rx Æ Clock Æ Invert
Intfc1 Rx Clock Invert:
Normal Inverted (E)
This selection controls clock inversion (added for compatibility with certain older
equipment). Select Normal or Inverted using the
W X arrow keys, then press ENTER.
(CONFIG: Intfc1 HSSI) Rx Æ Enable
Intfc1 Rx Enable:
Enable Disable (E)
Using the W X arrow keys, select Enable to activate the Rx side of this interface, or select
Disable to de-activate the Rx side and set the Data Rate to 0. Press
ENTER when done.
(CONFIG: Intfc1 HSSI) RTS/CTS
Intfc1 CTS/RTS:
Normal Fault
Select Normal or Fault using the W X arrow keys, then press ENTER.
Note: CTS is the same as CA, and RTS is the same as TA. The selections operate as follows:
• Normal: CTS = RTS
• Fault: CTS = RTS when no fault is present. CTS is not asserted when a fault is present.