Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–27
(CONFIG: Intfc1 HSSI) Tx Æ Clock
Intfc1 Tx Clock:
Normal Inverted (E)
To control clock inversion (added for compatibility with certain older equipment), select
Normal or Inverted using the
W X arrow keys, then press ENTER.
(CONFIG: Intfc1 HSSI) Tx Æ Enable
Intfc1 Tx Enable:
Enable Disable (E)
Using the W X arrow keys, select Enable to activate the Tx side of this interface, or select
Disable to de-activate the Tx side and set the Data Rate to 0. Press
ENTER when done.
(CONFIG: Intfc1 HSSI) Rx
Intfc1 Rx:
Data Buffer Clock Enable
Select Data, Buffer, Clock, or Enable using the W X arrow keys, then press ENTER.
(CONFIG: Intfc1 HSSI) Rx Æ Data
Intfc1 Rx Data:
Datarate Invert (E)
Select Datarate or Invert using the W X arrow keys, then press ENTER.
(CONFIG: Intfc1 HSSI) Rx Æ Data Æ Datarate
Intfc1 Data Rate:
Rx: 032.000000 Mbps
This screen is ‘status-only’ and indicates the Data Rate of the received MPEG-2 transport
stream. Press
ENTER or CLEAR to return to the previous menu.
(CONFIG: Intfc1 HSSI) Rx Æ Data Æ Invert
Intfc1 Rx Data Invert:
Normal Inverted (E)
To control data inversion (added for compatibility with certain older equipment), select
Normal or Inverted using the
W X arrow keys, then press ENTER.