Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–11
(CONFIG: Remote) Ethernet Æ SNMP Æ Community Æ Traps
SNMP Trap IP Address:
IP1 IP2 Version
Select IP1, IP2, or Version using the W X arrow keys, then press ENTER.
(CONFIG: Remote) Ethernet Æ SNMP Æ Community Æ Traps
Æ IP1, IP2
Trap ID #X:
000.000.000.000 ( E )
To edit the SNMP Trap IP#1 or IP#2 Address, first use the W X arrow keys to select
the digit to be edited, then use the
ST arrow keys to change the value of that digit.
Press
ENTER when done.
(CONFIG: Remote) Ethernet Æ SNMP Æ Community Æ Traps
Æ Version
Trap Version:
SNMPv1 SNMPv2 (E )
Select SNMPv1 or SNMPv2 using the W X arrow keys, then press ENTER.
5.3.1.2 (CONFIG:) Tx
IMPORTANT
The Scram(bler) selection only appears if the Mode selection is DVB-S2.
Tx: FEC Mod Code SymRate
Mode Freq Pwr Scram (E)
Select FEC, Mod, Code, SymRate, Mode, Freq, Pwr, or Scram using the W X arrow keys,
then press
ENTER.
(CONFIG: Tx) FEC
Tx FEC:
Viterbi + Reed-Solomon (E)
This screen is ‘status only’ and its appearance depends on the selection made under the
(CONFIG:) Tx Æ Mode menu.
For DVB-S2 Mode only: