Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–5
5.2.1 Menu Matrix
Sect. Description Remarks
5.2 Opening Screen
5.3 Select (Main) Menu Select: Config; Monitor; Test; Info; Save/Load; Util
5.3.1 Configuration Select: Remote; Tx; Rx: Int1; Int2; Ref; Aux; Alarms
5.3.1.1 (CONFIG:) Remote Control Select: Local; Serial; Ethernet; Ser+Eth
0 (CONFIG:) Tx Select: FEC; Mod; Code; SymRate; Mode; Freq; Pwr; Scram
5.3.1.3 (CONFIG:) Rx Select: FEC; Dem; Code; SymRate; Mode; Freq; Eb/No; PLL
5.3.1.4 (CONFIG:) Intfc1 (CDI-40 ASI Interface only) Select: Tx; Rx; Config
5.3.1.5 (CONFIG:) Intfc1 (CDI-60 HSSI Interface only) Select: Tx; Rx; CTS/RTS
5.3.1.6
(CONFIG:) Intfc2 (CDI-70 Gigabit Ethernet
Interface only)
Select: Ingress; Egress; Man; Stats
5.3.1.7 (CONFIG:) Ref
5.3.1.8 (CONFIG:) Aux Select: Ena/Dis; Force (1:1)
5.3.1.9 (CONFIG:) Alarms Select: Tx; Intfc1; Intfc2
5.3.2 Monitor Select: Alarms; Rx Stats; Event-Log
5.3.2.1 (Monitor:) Alarms Select: Transmit; Receive; Unit
5.3.2.2 (Monitor:) Rx Stats
5.3.2.3 (Monitor:) Event-Log Select: View; Clear-All
5.3.3 Test Select: Mode; TestPatterns
5.3.4 Info Select: Rem; Tx; Rx; Intfc1; Intfc2
5.3.5 Save/Load Select: Save; Load
5.3.5.1 (Save/Load:) Save
5.3.5.2 (Save/Load:) Load
5.3.6 Utility Select: RT-CLK; Ref; ID; Display; Firmware; FAST
5.3.6.1 (Utility:) RT-Clk
5.3.6.2 (Utility:) Ref
5.3.6.3 (Utility:) ID
5.3.6.4 (Utility:) Display
5.3.6.5 (Utility:) Firmware Select: Info; Select
5.3.6.6 (Utility:) FAST Select: Cnfg; View
Notes:
1. The CONFIG: Tx Æ Pwr Æ Imp (Impedance) selection appears only when the 70/140 MHz
Modulator card is installed.
2. Refer to CONFIG: Tx Æ SymRate for the Data Rate table.
3. The following CONFIG: submenus are available only when the Mode selection is DVB-S2:
Tx Æ Scram; Tx Æ Mod Æ Pilot; Tx Æ Mod Æ Frame; Rx Æ Dem Æ Pilot; and Rx Æ
Dem Æ Scr.