Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Rear Panel Connectors and Pinouts MN/CDM710.IOM
3–6
3.5 Power/Ground Connectors
3.5.1 AC Power Connector
A standard, detachable, non-locking, 3-prong power cord (IEC plug) supplies the
Alternating Current (AC) power to the modem. Observe the following:
3.5.2 Ground Connector (GND)
A #10-32 stud on the rear panel of the modem is used for connecting a common
chassis ground among all equipment.
Note: The AC power connector provides the safety ground.
Input Power
60W maximum
Input Voltage
100 to 240V AC 50/60Hz auto-ranging (unit
switches ranges automatically)
Connector Type
I.E.C
Fuse Protection
Line and neutral fusing.
For 115 and 230 volt AC operation, use T2.00A
20mm fuses.
Note: For 48 VDC operation, use T6.25A,
6.3x32mm fuses.