Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Appendix A MN/CDM710.IOM
A–31
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Demod
Acquisition
Sweep Width
RSW= 3 bytes Command or Query.
Rx ± acquisition sweep range of demodulator, in kHz, ranging from ± 1 to ± 100
kHz in the form xxx.
Example: RSW=009 (± 9 kHz selected)
RSW=
RSW?
RSW*
RSW#
RSW? RSW=xxx
(See Description of
Arguments)
Rx Transport
Mode
N/A 1 byte Query only.
Reads the transport mode for DVB-S2 mode only in the form x, where:
0 = Generic Mode
1 = Transport Stream (Default)
Note: Command applies only with DVB-S2 and HSSI. For any other mode, set
RTM to 1.
Example: RTM=1 (Transport Stream selected)
RTM?
RTM*
RTM#
RTM? RTM=x
Serial Number
N/A 9 bytes Query only.
Used to query the unit 9-digit serial number. Unit returns its S/N in the form
xxxxxxxxx.
Example: SNO=176500143
SNO?
SNO*
SNO#
SNO? SNO=xxxxxxxxx
Software
Revision
N/A 5 bytes Query only.
Unit returns the value of the internal software revision installed in the unit, in the
form Boot:X.X.X Bulk1:Y.Y.Y Bulk2: Z.Z.Z.
Example: SWR=Boot:1.0.3 Bulk1:1.0.1 Bulk2:1.0.0
SWR?
SWR*
SWR#
SWR? SWR=Boot:X.X.X Bulk1:Y.Y.Y
Bulk2:Z.Z.Z
Real-time Clock
Time
TIM= 6 bytes Command or Query.
A time as indicated from midnight, in the form hhmmss, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours: 12 minutes: 59 seconds)
TIM=
TIM?
TIM*
TIM#
TIM? TIM=hhmmss
Temperature
N/A 3 bytes Query only.
Unit returns the value of the internal temperature, in degrees C, in the form sxxx,
where:
s=sign (+ or -)
xxx=number of degrees.
Example: TMP=+026
TMP?
TMP*
TMP#
TMP? TMP=sxxx