Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Appendix A MN/CDM710.IOM
A–17
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Interface
Enable
TIE= 2 bytes Command or Query.
Interface Slot Enable/Disable in the form sx, where:
s=Defines which interface slot (1 or 2)
x=Tx Interface Status, where:
0=Disabled
1=Enabled
Example: TIE =11 (Transmit interface enabled)
TIE=
TIE?
TIE*
TIE#
TIE?s TIE=sx
Real-time Clock
Time
TIM= 6 bytes Command or Query.
A time as indicated from midnight, in the form hhmmss, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
TIM=
TIM?
TIM*
TIM#
TIM? TIM=hhmmss
Tx Interface
Port
TIP= 2 bytes Command or Query.
Indicates which port on the interface is to be used (ASI card only) in the form sp,
where:
s = interface slot (1 to 2)
p = interface port/channel (1 to 4)
1 = J4
2 = J5
Example: TIP=11 (Port J4 on Interface Slot 1 selected )
TIP=
TIP?
TIP*
TIP#
TIP?s TIP=sp
Tx Location of
the Pilot
TLP= 1 byte Command or Query.
Tx Pilot On/Off selection in the form x, where:
0=Average,
1=Peak
Example: TLP=0 (Pilot Average selected)
Note: Valid only in DVB-S2 mode.
TLP=
TLP?
TLP*
TLP#
TLP? TLP=x
Temperature
N/A 3 bytes Query only.
Unit returns the value of the internal temperature, in degrees C, the form sxxx,
where:
s=sign (+ or -)
xxx=number of degrees.
Example: TMP=+026
TMP?
TMP*
TMP#
TMP? TMP=sxxx
Tx Pilot On/Off
TPI= 1 byte Command or Query.
Tx Pilot On/Off selection in the form x, where:
0=Off,
1=On
Example: TPI=0 (Pilot Off selected)
Note: Valid only in DVB-S2 mode.
TPI=
TPI?
TPI*
TPI#
TPI? TPI=x