Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Ethernet Management MN/CDM710.IOM
6–6
response (for example, FRW? response) will be displayed as one line, with the latter lines overwriting
the previous lines.
In order to view the full response messages, CEFD recommends using HyperTerminal configured
as Telnet Client. To do so, configure HyperTerminal as follows:
1. Ensure that connection is made
using TCP/IP (Winsock)
instead of COM1 or COM2, as
shown in the example to the near
right.
2. ASCII Setup (File Æ Properties
Æ Settings Æ ASCII Setup):
Check the "Send line ends with
line feeds" option in the ASCII
Sending section and the
"Append line feeds to
incoming line ends" option in
the ASCII Receiving section, as
shown in the example to the far
right.
Login and remote command execution via HyperTerminal configured as Telnet Client appears as
per the following examples: