Product specifications

CDM-710 Broadcast Satellite Modem Revision 11
Front Panel Operation MN/CDM710.IOM
5–50
5.3.5.2 (Save/Load:) Load
Load Config from Loc: 9
11:02:43 05/08/05 ( E)
Using Loc: 9 as the example: If Load is selected and there is a configuration stored at the selected
location, what displays is similar to the preceding example. Note that the stored configuration is
identified with a date and time stamp.
If the selected location contains no data, what displays is similar to the next example:
Load Config from Loc: 9
Empty ( E)
Select the location from where the current configuration is to be loaded using the ST arrow keys,
then press
ENTER. There are 10 locations numbered 0 through 9.
If the selected location contains valid data, what displays is similar to the following example:
New Config has been
Loaded from Loc # (E)
Press ENTER or CLEAR to return to the previous menu.
If the selected location contains invalid data, what displays is similar to the next example:
Warning! Loc 9 Contains
No Data! (E)
Press ENTER or CLEAR to return to the previous menu.
5.3.6 SELECT: Util (Utility)
UTIL: RT-Clk Ref ID
Display Firmware FAST
Select a submenu from the Util: menu branch – RT-Clk, Ref, ID, Display, Firmware, or FAST
– using the
W X arrow keys, then press ENTER.
5.3.6.1 (UTIL:) RT-Clk
Edit Real-Time Clock:
10:23:51 23/05/06 ( E)
Edit the time and date settings of the real-time clock. Use the W X arrow keys to select the digit.
Use the
ST arrow keys to change the value of that digit, then press ENTER.
Note: In accordance with international convention, the date is shown in DAY/MONTH/YEAR
format.